Setting Up Yale Connect Wi-Fi Bridge

To install your Yale Connect Wi-Fi Bridge

For optimal performance and reliability, plug Yale Connect Wi-Fi Bridge into a power socket that is within 15 feet on an opposite or adjacent wall from your Yale Smart Lock.

1. Wait for the flashing green light on your Yale Connect Wi-Fi Bridge. If you don’t see the flashing green light press and hold the button on your Yale Connect Wi-Fi Bridge for 5 seconds.
2. In the Yale Access App, go to the side menu (upper left), tap Set Up New Device.
3. Choose Set Up a Connect Bridge.
4. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge.
5. When prompted, plug connect Bridge into a socket near your door and then follow the in-app instructions.

The accessory setup interface will ask you to choose your home Wi-Fi network. Once your Yale Connect Wi-Fi Bridge has successfully joined your home Wi-Fi network, the Yale Access App will check the signal levels of your Wi-Fi and bluetooth connections. If your signal levels are good, you’re almost finished. If your signal levels are low, you will be guided through adjusting the location of your Yale Connect Wi-Fi Bridget to improve its connection.

If you experience issues joining your Yale Connect Wi-Fi Bridge with your Wi-Fi network, this article provides troubleshooting steps.

Yale Connect Wi-Fi Bridge displays its current status through different LED indicator lights on the front of the device. This article helps you determine what the LED indicators on Yale Connect Wi-Fi Bridge mean as well as any troubleshooting steps you can take to improve functionality.