Press the programming button inside the safe, near the battery compartment. Type in your new code which can be between 4-12 digits. Then, press the programming button to complete.
IMPORTANT
The Fire Safe is NOT supplied with an over-ride key
It is therefore important to insert the batteries and set the user code, following the instructions supplied, before closing the door.
If the door is accidentally closed before inserting the batteries, connect a 9v battery to the battery port on the outside of the Safe. Whilst holding this in place, touch the screen and enter the pre-set factory code 1,2,3,4 and press the key button.
Now set the user code following the instructions in the user manual.
