Salva Series

Products

    Filter

      4 results

      • Salva-R Series Single Point Panic Exit Device

        Material: 

        Push bar –Steel/Stainless steel pressed

        Head Cover – Steel/Stainless steel pressed

        Spring – Stainless steel

        Latchbolt: 

        3/4” throw, deadlocking design

        Strike: 

        For 5/8” stop

        Projection: 

        Pushbar Neutral: 2-3/16”(55mm), Pushbar Depressed: 1-7/8”(47mm)

        Reversible: 

        Non-handed, reversible for all functions and trims

        For Door: 

        1-3/4” thick of wood or metal door

        Door Width: 

        3” standard for door width of 2”-6” to 3”

        4” standard for door width of 3” to 4”

         

         

        Stile: 

        4-1/4” minimum

        Mounting Height: 

        40-5/16” from CL to finished floor recommended

        Mounting Fasteners: 

        Furnished standard with sheet metal & machine screws or SNB as option

        Cylinder: 

        For trim, knob, lever & thumb-piece type

        Dogging: 

        1/4 turn, hex key dogging on non-fire labeled device

        UL Listed: 

        For “Panic Hardware” and “UL”. Labeled (3 hours) fire exit hardware

        Operation: 

        Inside by slight pressure on any point of the push bar all time

      • Salva-V Series Double Point Panic Exit Device

        Material: 

        Push bar –Steel/Stainless steel pressed 

        Head Cover – Steel/Stainless steel pressed

        Spring – Stainless steel

        Latchbolt: 

        3/4” throw, stainless steel

        Dead Latch Bolt: 

        5/8”, steel

        Strike: 

        For 5/8” stop. Plus shim for 1/2” stop

        Projection: 

        2-1/2” maximum, 1-7/8” pressed

        Reversible: 

        Non-handed, reversible for all functions and trims

        For Door: 

        1-3/4” thick of wood or metal door. Specify thickness if other than 1-3/4”

        Backset: 

        2-3/4” standard

        Door Width: 

        3” standard for door width of 2”-6” to 3”-0” 

        4” standard for door width of 3”-0” to 4”-0”

        Stile: 

        4-1/4” minimum

         

        Top & Bottom Rod Length for 7" door: 

        Top rod 45-1/4”, bottom rod 34”

        Mounting height: 

        40-5/16” from CL to finished floor recommended

        Mounting: 

        Furnished standard with sheet metal & machine screws or SNB as option

        Cylinder: 

        For trim, knob, lever & thumb-piece type “Schlage C” key way

        Dogging: 

        1/4 turn, hex key dogging on non-fire labeled device

        UL Listed: 

        For “Panic Hardware” and “UL”. Labeled (1.5 hours) fire exit hardware

        Operation: 

        Inside by slight pressure on any point of the push bar all time

         

      • Salva-T-EPC Euro Lever Trim

        Material: Steel 

        Function: Classroom 

         Locks and unlocks with a key & can remain unlocked

         Suitable for door thickness of 32-51mm

         Keyed different: 2 Keys

        Finish options:

        Stainless Steel (US26D)

        Silver Paint

      • Salva-T-ANSI Trim

         Material: Steel 

         Keyed different: 2 Keys

        Finish*: 

        Stainless Steel (US26D)

        *Trim is not available in Silver Paint finish. Only available in Stainless Steel (US26D) finish. 

      Showing 4 of 4